Home > News > Content

Storage Cage Usage And Precautions

Storage Cage usage and precautions

Storage Cage is mainly used in the factory, factory storage turnover on raw materials, semi-finished products stored in warehouse, and parts used in the large supermarket goods store distribution, it can protect the goods from the impact, etc. As a result, it is a reusable form of protective packaging. The Storage Cage with standard size is an important container for the logistics chain.

Storage Cage is used for production, storage and transportation of goods, often in very severe cases multiple handling, to ensure that the goods and packaging to maximum intact when cycle handling, reduce the loss, can reduce the cycle of change the packing of trouble at the same time, the direct use of mechanized handling, improve the speed of logistics. The Storage Cage can provide good packaging for some large items, reduce the cost of storage and transportation directly for enterprises and reduce the damage of goods. At the same time, the service life and reusable use of Storage Cage can greatly reduce the packaging cost of enterprises (compared with traditional packaging).

1. Storage Cage open for use

Using a folding warehouse cage, must have two operation, the process is: two people standing on both sides of warehouse cage, before the first net up, then connected the side mesh and mesh surface, insert two side mesh reverse warehouse cage base, at the same time pay attention to the cohesion and former mesh, finally anchored mesh door before inserting the side mesh.

A good warehouse cage should be smooth corners, symmetry, if found to have uneven phenomenon, do not use, must check whether the mesh door bolt is inserted in place, otherwise the effect to use can lead to accidents.

Ii. Release

The Storage Cage can directly place the items, but in the case of the warehouse cage, the size and weight of the items are determined to recommend to the user the specification of the warehouse cage (diameter and grid size).

Some can't touch or easy to scratch the surface of the object (such as plastic parts, after coating the surface of the sheet metal parts, etc.), can use the warehouse Storage Cage, but must be on the inner wall of the warehouse cage with wantong board or cardboard, in order to protect the object from harm.

Items are placed in to the warehouse cage, when considering the stacking warehouse cage above the feet, the size of the items the best height should be lower than store warehouse cage edge 3 cm, it is forbidden to store goods warehouse cage edge higher, otherwise the forklift in handling warehouse cage will be under the damage of the items in the warehouse cage.

Three, handling

The Storage Cage must be carried by the handling machine, which can carry the machinery of the Storage Cage, including the balancing weight and the forward forklift truck, the hydraulic pallet, the Storage Cage, the electric bottle tractor, etc. In order to improve the handling efficiency, two Storage Cages can be transported together, but in this way, the load bearing capacity and the speed of the turn must be taken care of. And three or more Storage Cage stacking is absolutely prohibited because it is too dangerous.

Four, stacking

Before stacking must be checked before the door of the mesh plug is inserted in place, a warehouse cages stacked in another warehouse cage must make the warehouse cage above four corners are sitting in the warehouse below the upper side of the cage net, and otherwise be stacking. The number of layers in the warehouse cage shall be strictly implemented according to the sample directions, and the load bearing must be paid attention to when stacking.

Warehouse cage layer stacking state can take at any time any warehouse cage in stock items, as long as the front of the cage to the warehouse can take of the upper of the mesh, but must pay attention to when open the cage goods storage state, in case things slide.